Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Norfolk?
Spring replacement in Norfolk typically costs $180 – $340 for a single torsion or extension spring, including the part and the labor to install it. If both springs on a two-spring door are worn, they’re usually replaced as a matched pair, which runs about $360 – $680. These are estimated ranges for the Norfolk market in 2026; the written estimate we give you after we look at the door sets the final price.
Torsion springs carry the full weight of the door. If one has snapped, don’t run the opener and don’t try to wind the new spring yourself – the tension on those windings can cause serious injury. Call Juniper Garage Door Repair at (877) 384-9329. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Spring Replacement Cost Breakdown (2026)
Here’s how spring work in Norfolk breaks down by line item. These are typical estimated ranges, not quotes. What you actually pay depends on the door, the spring type, and what we find once we’re in front of it.
| Work | Typical Estimated Range |
|---|---|
| Single torsion spring replacement | $180 – $340 |
| Single extension spring replacement | $180 – $340 |
| Matched pair (torsion or extension) | About twice the single-spring range: $360 – $680 |
| Cable repair (often needed when a spring lets go) | $130 – $250 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| Panel replacement (if the door came down hard) | $250 – $500 |
| Opener repair (motor strained by a broken spring) | $120 – $320 |
| Full garage door repair, all-in | $150 – $600 |
| New door installation, if the door is past saving | $700 – $2200 |
What pushes the price up: a matched pair instead of a single spring, a heavier or taller door (double-car doors use larger springs than single-car doors), high-cycle springs rated for more open-close cycles, and any collateral damage – a bent track, a cracked panel, or a stripped opener gear after the door came down under power.
What keeps it down: replacing the pair before the second spring fails, catching a stretched extension spring early, and having a standard single-car door with a stock spring size. Most spring jobs stay within one visit once we’ve confirmed the spring on site.
What Affects Spring Replacement Pricing in Norfolk
- Spring type. Torsion springs mount on a shaft above the door; extension springs stretch along the tracks on each side. Torsion setups usually take a bit more labor to wind safely, and the parts cost differs.
- Door weight and size. A two-car door carries noticeably more weight than a single-car door, so it needs larger springs and often a pair. That moves the job toward the upper half of the range.
- One spring or two. Most modern doors have two springs. If one has broken and the other is the same age, replacing both at once usually costs less overall than two separate visits, and you avoid a second failure.
- Spring cycle rating. Standard springs and high-cycle springs are priced differently. High-cycle springs cost more up front but are built to last through more open-close cycles, which matters on a door you use constantly.
- Condition of the rest of the hardware. A spring failure often stresses the cables, rollers, and track. If those need attention too, the total climbs – but it’s cheaper than fixing each piece on its own visit.
- Access and door condition. A clear, level garage floor and a door that’s still square make the job faster. A door that’s come off its track takes more time to bring back to a safe working state before the spring goes in.
Norfolk’s housing stock runs from older homes with original wood doors to newer builds with steel sectional doors, and the spring setup differs across them. Our technicians have up to 13 years of experience and work on whatever’s in your garage rather than just one brand. We’re factory-familiar with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so we arrive already knowing the quirks of the system on your door.
How to Save on Spring Replacement
Springs are a wear part, and there’s a limit to how much you can shave off the price without cutting into safety. That said, a few things genuinely help.
- Replace the pair together. If one spring has failed and the other is the same age, doing both in one visit is usually cheaper than paying for two separate jobs – and it stops the second spring from stranding you later.
- Get it diagnosed before you buy parts. A door that won’t open isn’t always a spring. It could be a cable off its drum, a bound roller, or a strained opener. We diagnose first and fix the actual cause, so you don’t pay to replace a spring that’s still fine.
- Repair before you replace the door. A spring is a small fraction of the cost of a new door. Unless the panels are badly damaged, the door is almost always worth repairing.
- Ask for a written estimate. We put the price in writing before any work starts, so there are no surprises on the final bill. Estimates are free.
- Bundle related fixes you already know about. If a roller is squealing or a track is nicked, mention it when you call so it can be handled in the same visit rather than as a separate trip.
Call (877) 384-9329 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you’re in Norfolk, we can often get a technician out the same day to confirm what’s wrong and give you a written price.
Frequently Asked Questions About Spring Replacement Cost
How much does spring replacement cost in Norfolk?
Spring replacement in Norfolk typically runs $180 – $340 for a single spring, and about $360 – $680 for a matched pair. The written estimate sets the final price. Call (877) 384-9329 for a free estimate.
Is it cheaper to repair or replace a garage door spring?
Repairing the spring is almost always cheaper than replacing the door – a spring job is a fraction of a new door installation at $700 – $2200. Replacement only makes sense when the panels or frame are damaged beyond a sensible repair. Call (877) 384-9329 and we’ll tell you honestly which one you’re facing.
Do I need to replace both springs at once?
Usually yes, when both are the same age. A pair runs about $360 – $680, versus two separate single-spring visits. Replacing both together also prevents the second spring from failing soon after. Call (877) 384-9329 for a written price on your door.
Can you fix a broken spring the same day?
In many cases, yes. Spring work starts at $180 for a single spring, and we dispatch fast from 7am to 7pm, Sunday through Friday. We answer 24/7, so call (877) 384-9329 and we’ll book the soonest opening.
Will my homeowner’s insurance cover a broken garage door spring?
A broken spring is generally considered normal wear and tear, so it’s usually not covered – expect to pay the $180 – $340 single-spring or $360 – $680 pair range yourself. If the spring failed as part of a covered event like a vehicle impact, talk to your insurer. For the repair itself, call (877) 384-9329 for a free estimate.
What does a spring replacement include?
The price covers the new spring (or pair) and the labor to install it safely, including rebalancing the door afterward. Single springs run $180 – $340; a pair is about twice that. Any extra hardware like cables, rollers, or track work is priced separately and confirmed with you first. Call (877) 384-9329 to get it in writing.
Pricing reflects the Norfolk market as of 2026. Juniper Garage Door Repair offers free estimates – call (877) 384-9329.
Written by the team at Juniper Garage Door Repair.
What Our Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Laura Meyer"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Tara Anderson"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Cedric Prince